Prices & costs

Used Aesthetic Machine Prices in Ireland

Updated 18 October 2026

Used prices for the 13 machines on our site run from as little as €1,200 for an original CoolSculpting unit to a top figure of €95,000 for an Emsculpt Neo (setting aside EmFace's questionable €150,000), and the width of each range matters as much as the numbers. A tight range such as Emsculpt Neo's €60,000 to €95,000 is a usable guide. A range such as EmFace's €15,000 to €150,000 is a warning that the research is thin. All figures are our machine page figures.

Key takeaways

  • On our machine page figures, used prices start at €1,200 for an original CoolSculpting unit and top out at €95,000 for an Emsculpt Neo, setting aside EmFace's €150,000.
  • Seven of the 13 ranges are narrow, with a top no more than twice the bottom, and those are the most usable guides.
  • Exion (8.1x), EmFace (10x) and CoolSculpting (31x) have very wide ranges, which signals thin or inconsistent research rather than a price.
  • The bottom of the used ranges is between about 1% and 46% of new list price, so depreciation varies hugely by model.
  • These are researched ranges, not completed-sale data or valuations.

What do used aesthetic machines cost in Ireland?

The table is grouped by how wide the range is, from the most reliable guide to the least. "Spread" is the top of the used range divided by the bottom. "Used low as share of new" is the bottom of the used range as a percentage of the new list price.

Narrow ranges (top is no more than twice the bottom)

MachineNew listUsed rangeSpreadUsed low as share of new
BTL Emsculpt Neo€130,000€60,000 to €95,0001.6x46%
InMode Morpheus8€60,000€25,000 to €45,0001.8x42%
HydraFacial Syndeo€30,000€12,000 to €22,0001.8x40%
Alma Soprano Ice Platinum€85,000€30,000 to €55,0001.8x35%
Candela GentleMax Pro€95,000€25,000 to €50,0002.0x26%
Classys Ultraformer III€28,000€10,000 to €20,0002.0x36%
Lumenis Stellar M22€90,000€23,000 to €46,0002.0x26%

Medium ranges (two to four times)

MachineNew listUsed rangeSpreadUsed low as share of new
Lumenis M22€60,000€12,000 to €30,0002.5x20%
Lumenis UltraPulse€80,000€15,000 to €40,0002.7x19%
HydraFacial MD Elite€32,000€5,500 to €22,5004.1x17%

Wide ranges (treat with caution)

MachineNew listUsed rangeSpreadUsed low as share of new
BTL Exion€95,000€9,000 to €73,0008.1x9%
BTL EmFace€130,000€15,000 to €150,00010x12%
Zeltiq CoolSculpting€100,000€1,200 to €37,00031x1%

How to read the wide ranges honestly

A range that spans a factor of eight, ten or thirty is not a price guide in any ordinary sense. It means our research found very different numbers and could not reconcile them. There are three likely reasons, and we would rather say so than hide the gap.

  • A thin market. Our EmFace page notes the machine is recent enough that the used market is thin, so resale pricing is not yet well established. The top of the range there, €150,000, is higher than the €130,000 new list price on the same page. A used machine does not normally cost more than a new one, so treat that upper figure as unreliable. It may reflect a bundle, a different configuration or a different currency or market.
  • Different generations under one name. CoolSculpting's original system has been superseded by CoolSculpting Elite, according to our page, which is why original units now sell well below replacement cost. The bottom of the range reflects those. The top will reflect something else entirely.
  • Different contents. Applicators, cycles, handpieces and warranties can change what a "machine" is. An Exion with a full applicator set is not the same product as a bare console.

For any machine in the wide group, do not average the ends. Find two or three comparable current ads, get the exact specification of each, and price from those.

What the narrow ranges tell you

The narrow group tends to be machines with established demand and a clear resale path. Emsculpt Neo, Morpheus8, Syndeo and Soprano all have used ranges within a factor of 1.8, and our pages rate demand for them at 4 or 5 out of 5. The pattern is worth noting, but we are not claiming cause and effect. A narrow range may simply mean fewer data points agreed with each other.

Even in this group, a gap of €15,000 to €35,000 between bottom and top is large in cash terms. Emsculpt Neo's narrow 1.6x spread is still €35,000.

Three rules for using a used price range

  1. Place the unit in the range using condition, not hope. Age, service history, remaining life in lamps, tubes and handpieces, and what is included decide where a unit sits. Our inspection checklist and service history guide cover what to ask.
  2. Compare like with like. If an ad does not state the exact model, applicator set and warranty position, ask before you compare it with anything.
  3. Add the running costs. A cheap unit with expensive consumables is not cheap. See the cost per treatment table.

If you are selling

Resist anchoring on what you paid. Find your machine in the table, note whether its range is narrow or wide, and price from comparable current ads plus your own condition evidence. If your machine is in the wide group, the honest approach is a realistic asking price with the specification written out in full. The pricing method guide walks through it, and you can list free with no commission. Buyers can browse current listings and the laser hair removal category, among others.

Limits of this table

These ranges are researched from public sources. They are not completed-sale prices, and they are not valuations. Our methodology article explains the limits in more detail. Prices vary and change quickly, so get written quotes and inspect any used unit before paying.

Sources and notes

Machine figures are Aesthetic Machines Ireland researched ranges, not completed-sale data.

Frequently asked questions

What is the cheapest used aesthetic machine on your site?

On our figures, the original CoolSculpting system has the lowest used starting point at €1,200, followed by the HydraFacial MD Elite at €5,500. The cheap end often reflects superseded models or running costs the buyer takes on.

How much do used aesthetic machines depreciate?

The bottom of our used ranges is between about 1% and 46% of the new list price, and the top between about 37% and 77% apart from the EmFace figure. Depreciation varies hugely by machine, so check the specific model.

Why is the EmFace used range so wide?

Our page says the used market is thin and resale pricing not well established. The top figure exceeds the new list price, so treat it with caution.

Are these prices what machines actually sold for?

No. They are researched ranges, not completed-sale data. Use them to orient yourself, then compare current ads and quotes.

Does EU medical device law cover buying a second-hand machine?

The Medical Device Regulation says it does not seek to harmonise rules on the further making available of devices already in service, giving second-hand sales as an example, and it defines a fully refurbished device as one rebuilt and given a new lifetime (EUR-Lex). So ask the seller for the unit's CE documentation and check the position for a resale with the HPRA.

How do I tell whether a used price is fair?

Find two or three current ads for the same model, write down what each includes, and place your unit by condition and service history. A written quote for a new unit gives you the ceiling.

What costs come on top of a used machine's price?

Consumables, replacement lamps, tubes or handpieces, servicing, training and transport. Our cost per treatment table shows how different the running costs are.

Related guides